Stereolithography is to be used to build the part shown below. Dimensions of the part are: height 125 mm, outside diameter 75 mm, inside diameter 65 mm, handle diameter 12 mm, handle distance from …

The cost of the stereolithography machine is $60,000 installed. It operates 5 days per week, 8 hours per day, 50 weeks per year, and is expected to last 5 years.

32.5 Which one of the following rapid prototyping processes uses a photosensitive liquid polymer as the starting material: (a) droplet deposition manufacturing, (b) fused-deposition modeling, (c) laminated …

Question: Stereolithography is to be used to build a part as shown in the figure. Dimensions are; height 230 mm, outside diameter-75 mm, inside diameter 65 mm, handle diameter = 6 mm and handle …

Question: Assume the line width in a stereolithography operation is 0.20 mm. Estimate the time (in seconds) required to cure a layer defined by a 48-mm-diameter circle of the adjacent lines overlap …

A cone-shaped part is to be fabricated using stereolithography. The radius of the cone at its base = 35 mm, and its height = 50 mm. To minimize the staircase effect, layer thickness = 0.05 mm. The …

Engineering Mechanical Engineering Mechanical Engineering questions and answers Problem 4. (Build Cycle Time in Stereolithography) The square cup-shaped part shown is fabricated using …

A tube with a rectangular cross section is to be fabricated using fused deposition modeling instead of stereolithography. Outside dimensions of the rectangle are 38 mm by 60 mm, and the corresponding …

(Cost per Piece in Additive Manufacturing) The cost of the stereolithography machine is $60,000 installed. It operates 5 days per week, 8 hours per day, 50 weeks per year, and is expected to last 5 …

a) Using Stereolithography: Laser beam diameter is 0. 2 mm and laser beam speed across the polymer is \ ( 9 0 0 \ mathrm {~mm} / \ mathrm {s} \) Each layer is 0. 1 0 mm thick, and the …